Digital - Analog load limiting device/Indicator suitable for lifting system

รายละเอียด รูปภาพเพิ่มเติม สินค้าที่เกี่ยวข้อง

TLU : Digital - Analog load limiting device/Indicator suitable for lifting system

TLU : (cat. 2 EN 954-1) .

TLUANA : uscita analogica / analog output .

Options on request :

CASTL IP67 box version with transparent cover
CASTLPG9 transparent version with 6 PG9 cable glands
CASTLGUA transparent version with 6 PVC fi ttings
CASTLTAST IP67 box version with external keypad
CASTLTASTPG9 keypad vers. with 6 PG9 cable glands
CASTLTASTGUA keypad version with 6 PVC fi ttings
IP67 ATEX version II 3GD (zone 2-22)
2 Analog inputs 0-10V, 10 bits (they replace logic inputs)

Weight indicator for Omega/DIN rail mounting suitable for back panel or junction box. Six-digit semialphanumeric display (8 mm h), 7 segment LED. Four-key keyboard. Dimensions: 123 x 92 x 50 mm. IP67 box version dimensions: 170x140x95 mm. Four fi xing holes diameter 4mm (centre distance 122x152 mm).

- Load cells connections continuous Check.

-Three alarm thresholds normally closed and one SPDT contact (Single Pole Double Throw).

- RS485 and RS232 serial outputs for connection to remote display, PC/PLC up to 32 instruments (max 99 with line repeaters) by ASCII Laumas protocol (compatible with W60000) or ModBus RTU Protocol. Optional Protocols: Profi bus DP, Ethernet/ModbusTCP, USB and Radio by appropriate converter.

ANALOG OUTPUT version (mod. TLUANA): opto-isolated 16-bit analog output: 0-20 mA; 4-20 mA (max 300 ohm); 0-10V; 0-5V; +/-10V; +/-5V (min 10 kohm).

THEORETICAL CALIBRATION is performed via keyboard.

Technical Features :

	POWER SUPPLY and CONSUMPTION	12 - 24 VDC +/- 10% ; 5 W
	No LOAD CELLS IN PARALLEL and SUPPLY	max 8 ( 350 ohm ); 5VDC/120mA
	LINEARITY / LINEARITY OF ANALOG OUTPUT	< 0.01% Full Scale / < 0.01% F.S.
	THERMAL DRIFT / THERMAL DRIFT OF ANALOG OUTPUT	< 0.0005 % F.S. /°C < 0.003% F.S. /°C
	A/D CONVERTER	24 bit (16000000 points) 80Hz
	MAX DIVISIONS (with measure range: +/- 10mV = 2mV/V)	± 999999
	MEASURE RANGE	± 19.5 mV
	MAX LOAD CELL’S SENSITIVITY	± 3 mV/V
	MAX CONVERSIONS PER SECOND	80 conversions/sec.
	DISPLAY RANGE	- 999999 ; + 999999
	DECIMALS / DISPLAY INCREMENTS	0 - 4 ; x 1 x 2 x 5 x 10 x 20 x 50 x 100
	DIGITAL FILTER / CONVERSION RATE	0.080 - 7.5 sec / 5 - 80 Hz
	LOGIC RELAY OUTPUTS	N.4 - max 115 VAC / 150mA
	LOGIC INPUTS	N.2 - optoisolated 5 - 24 VDC PNP
	SERIAL PORTS	RS485, RS232
	BAUD RATE	2400, 4800, 9600, 19200, 38400, 115200
	HUMIDITY (condensate free)	85 %
	STORAGE TEMPERATURE	- 30°C + 80°C
	WORKING TEMPERATURE	- 20°C + 60°C

Digital - Analog load limiting device/Indicator suitable for lifting system

กดเพื่อขยายขนาด

ไม่มีสินค้าที่เกี่ยวข้องสำหรับสินค้านี้